• HMI와 PLC와 RS485 1.0GHz 이더캣 모션 콘트롤러
  • HMI와 PLC와 RS485 1.0GHz 이더캣 모션 콘트롤러
HMI와 PLC와 RS485 1.0GHz 이더캣 모션 콘트롤러

HMI와 PLC와 RS485 1.0GHz 이더캣 모션 콘트롤러

제품 상세 정보:

원래 장소: 중국
브랜드 이름: Vector
인증: CE
모델 번호: VEC-VE-MU-AH-16-SMB

결제 및 배송 조건:

최소 주문 수량: 1개 장비
가격: To Be Discussed
포장 세부 사항: 144*128*69mm, 176*164*78mm, 316*164*78mm
배달 시간: 3-5 작업 일수
지불 조건: L/C (신용장), 전신환, 웨스턴 유니온
공급 능력: 500-1000 장비 /Month
최고의 가격 접촉

상세 정보

프로그래밍 도구: CODESYS 언어: IEC61131-3 표준 6 언어
중심선: 16 주축 확장: 디지털, 아날로그, 부호기, 열전대, 하이브리드이 IO
체르티픽타이스: 세륨, FCC 통신 프로토콜: 이더캣은 버스를 탑니다
주파수: 1.0GHz 통신 기능: RS485, 이더넷과 USB
하이 라이트:

HMI 이더캣 이동 Controller

,

1.0GHz 이더캣 이동 Controller

,

1.0GHz 프로그램 가능한 이동 관리인

제품 설명

Programmable Motion Cotroller With HMI And PLC Ethercat Bus Type

 

Motion control function block conforms to PLCOPEN2.0.

64 servo axes can be connected, the real axis and the virtual axis can be controlled at the same time,

the bus communicates at a rate of 100Mbps, the distance between the two servo slave stations can reach

100M, and the full digital IO configuration of the entire expansion system of the bus can reach 30,000 points.

Support Jerk function, set the rate of change of acceleration/deceleration; Support BufferMode function,

softer motion curve;

 

Motion control function block conforms to PLCOPEN2.0,And expanded more motion control functions to

cope with different applications

 

Products Features

Products Ethercat Bus Multi Axes Motion Controller
Brand Vector
Model No. VEC-VE-MU-AH-16-SMB
Axis 16 Axis
Progarmming Tool CODESYS
Programming Language

Supports IEC61131-3 programming languages: FBD, LD, IL, ST,SFC and CFC

RMain frequency 1.0GHZ
Expansion Units Digital, Analog, Encoder, Thermocouple, Hybrid
Communication Protocols EtherCAT Bus

 

 

PLCopen is an independent global organisation that delivers industrial automation efficiency according to

user needs. It was founded in 1992 and is based in the Netherlands with support offices in the USA, Japan,

China and Korea. PLCopen follows the requirements of market demand and its main focus is to improve

automation efficiency by defining common standards. PLCopen and its members focus on technical
specifications around the IEC 61131-3 standard to reduce the cost of industrial engineering.

 

The syntax of the IEC 61131-3 specification presents a set of mechanisms for implementing programmable

controllers across different target platforms. Through modular planning and design, the specification divides

control actions into two parts: logical operations and hardware actions. The logical part unifies the syntax
defined in IEC 61131-3 in a common description format and implements it, while the hardware actions are

designed with a proprietary firmware library for each hardware, allowing the control logic to use hardware

resources on each target platform. This design allows different control chips to execute control actions

designed in the IEC 61131-3 syntax, and designers only need to learn the IEC 61131-3 syntax to use
the supported control chips for programmable controller design. The IEC 61131-3 standard defines six

standard programming languages:

(Instruction List,IL)
(Ladder Diagram,LD)
(Function Block Diagram,FBD)
(Structured Text Language,STL)
(Sequential Function Chart,SFC)
(Continuous Function Chart,CFC)

 

The VE motion controller uses the CODESYS programming platform, which fully supports the PLCopen

specification and allows the user to refer to many standard function libraries; the high-level language

programming method makes it easy for PLC manufacturers and users to develop their own proprietary

function blocks and instruction libraries, and to borrow similar control programs to form industry-specific

"process packages", which can significantly improve the user's programming efficiency.

HMI와 PLC와 RS485 1.0GHz 이더캣 모션 콘트롤러 0HMI와 PLC와 RS485 1.0GHz 이더캣 모션 콘트롤러 1

CODESYS Software:

CODESYS software is standard software for the development and application of VE
programmable motion controller products. CODESYS software platform provides VE
controllers with a complete configuration, programming, debugging, monitoring
environment, flexible and free to handle the powerful IEC language.
The codesYS software enables the management of engineering and equipment,
providing the following configurations for VE controller products:

1. CPU configuration;
2. I/O module configuration;
3. EtherCAT bus;
4. ModbusRTU/ModbusTCP bus;
5. Standardized programming (IEC61131-3 compliant).
6. Supports all six programming languages: Structured Text (ST), Function Block Chart
7. (FBD), Instruction List (IL), Keystone (LD), Sequential Function Map (SFC), and
8. IEC61131-3 Extended Programming Language Continuous Function Map (CFC)
9. Flexible and comprehensive feature block libraries and support user-defined libraries
10. Offline simulation function,do not need to connect PLC hardware,complete the program simulation debugging
11. Intelligent debugging error check function
12. Compile errors, quickly locate programming errors, and diagnose logs
13. Sample tracking
14. The time series chart of the process variable is established

Products Models:

VEC-VE-MU-AH-08-SMB Main frequency 0.6GHZ, 8-axis operation control, in line with 61131-3 standard, motion control library, with 15-inch touch screen display
VEC-VE-MU-AH-16-SMB Main frequency 1.0GHZ, 16-axis operation control, in line with 61131-3 standard, motion control library, with 15-inch touch screen display
VEC-VE-MU-AH-32-SMB Main frequency 1.6GHZ, 32-axis operation control, in line with 61131-3 standard, motion control library, with 15-inch touch screen display
VEC-VE-MU-AH-64-SMB Main frequency 1.8GHZ, 64-axis operation control, in line with 61131-3 standard, motion control library, with 15-inch touch screen display
   
VEC-VE-MU-AH-08-CNC Main frequency 0.6GHZ, 8-axis operation control, in line with 61131-3 standard, motion control library, CNC and Robot control and algorithm library, with 15-inch touch screen display
VEC-VE-MU-AH-16-CNC Main frequency 1.0GHZ, 16-axis operation control, in line with 61131-3 standard, motion control library, CNC and Robot control and algorithm library, with 15-inch touch screen display
VEC-VE-MU-AH-32-CNC Main frequency 1.6GHZ, 32-axis operation control, in line with 61131-3 standard, motion control library, CNC and Robot control and algorithm library, with 15-inch touch screen display
VEC-VE-MU-AH-64-CNC Main frequency 1.8GHZ, 64-axis operation control, in line with 61131-3 standard, motion control library, CNC and Robot control and algorithm library, with 15-inch touch screen display

 

 


Expansion Units

 

EtherCAT bus coupler, digital input output expansion module, analog input output

expansion module, thermocouple expansion module, encoder (with probe function,

can send AB phase differential pulse) expansion module, hybrid expansion module.

 

16-point DI input, 16-point DO output (expandable 2-way encoder count)

input and output can be NPN or PNP

HMI와 PLC와 RS485 1.0GHz 이더캣 모션 콘트롤러 2

Packing and Shipping

Packing details of Motion Controller
Products VA Motion VA Expansion VE Motion VE Expansion(32) VE Expansion(76)
Ctn. Size 176*165*78 127*75*70 144*128*69 176*164*78 316*164*78

HMI와 PLC와 RS485 1.0GHz 이더캣 모션 콘트롤러 3

Delivery Time

Quantity 1-5 kits 50-100 kits 200-500 kits
Delivery time Within 3 days 5-10 days 15-25 days

 

1. For small order we always can delivery out within 1 week.

2. Our products can be shippied via Air, Land or Sea.

 

Certificates: 

 

We got CE and FCC sertificates for the VE series Motion controller.

HMI와 PLC와 RS485 1.0GHz 이더캣 모션 콘트롤러 4

 

Contact Us

 

HMI와 PLC와 RS485 1.0GHz 이더캣 모션 콘트롤러 5

 

이 제품에 대한 자세한 내용을 알고 싶습니다
나는 관심이있다 HMI와 PLC와 RS485 1.0GHz 이더캣 모션 콘트롤러 유형, 크기, 수량, 재료 등과 같은 자세한 내용을 보내 주시겠습니까?
감사!
답변 기다 리 겠 습 니 다.