• 1KW 2000rpm AC Servo Control System With 2500 Pulse Incremental
  • 1KW 2000rpm AC Servo Control System With 2500 Pulse Incremental
1KW 2000rpm AC Servo Control System With 2500 Pulse Incremental

1KW 2000rpm AC Servo Control System With 2500 Pulse Incremental

제품 상세 정보:

원래 장소: 중국
브랜드 이름: Vector
인증: CE
모델 번호: VEC-VC-00623H-M-E/130ME-00120A23-MF2M

결제 및 배송 조건:

최소 주문 수량: 1개 장비
가격: USD 300-450 / kit
포장 세부 사항: 280*208*78mm
배달 시간: 3-5 작업 일수
지불 조건: 전신환, 웨스턴 유니온, L/C (신용장)
공급 능력: 500개 장비 / 달
최고의 가격 접촉

상세 정보

전압: 220V 힘: 1KW
정격 전류: 6A 정격 속도: 2000 분당 회전수
평가된 토크: 4.77N.m 단계: 3 단계
모터 플렌지 사이즈: 130 밀리미터 통신 프로토콜: Modbus/CANopen/EtherCAT
모델: VEC-VC-00623H-M-E/130ME-00120A23-MF2M 애플리케이션: 자동적인 포장기
하이 라이트:

1KW AC Servo Control System

,

2000rpm AC Servo Control System

제품 설명

1KW 2000rpm Servo Motor Drive Servo System for Automatic Packing Machine

 

Servo System for Automatic Packing Machine

AC Power 220V 1KW

Three phase with 2500 pulse incremental + Hall encoder;

Modbus/CANopen/EtherCAT Commucation Protocol Type

 

Products Description

 

Products Absolute Servo System Kit
Brand Vector
Model No. VEC-VC-00623H-M-E/130ME-00120A23-MF2M
Power 1KW
Voltage 220V
Phase Three Phase
Rated Speed 2000 rpm
Rated Current 6A
Rated Torgue 4.77N.m
Communication Protocols Modbus/CANopen/EtherCAT

 

Voltage Control Mode Single-phase / three-phase full-controlled rectification
SVPWM modulation
Encoder Encoder Feedback 2500 pulse incremental + Hall encoder;
2500 pulse incremental;
17bit Tamagawa absolute encoder;
23bit Tamagawa absolute encoder;
24bit Nikon absolute encoder;
Pulse Command Input Pulse Type Differential input,Open collector
Frequency Range Differential input:0-500kHz,pulse width greater than 1us
Open collector: 0-300kHz,pulse width greater than 2.5us
Pulse Mode pulse + direction; AB pluses; CW+CCW;
Analog Input Voltage Range -10V to 10V
Input Impedance 10kΩ
Maximum Frequency 1.5kHz
DI/DO Interface Type NPN/PNP
Communication Protocol Type Modbus/CANopen/EtherCAT

 

Digital Input Enable Drive, Reset Drive, Torque Command A/B Switch, Torque Command Reverse
Enable, Forward Torque Limit A/B Switch, Negative Torque Limit A/B Switch, Forward
Speed Limit A /B switch, negative speed limit A/B switch, forward jog, reverse jog, speed
command reverse enable, main speed source A/B switch, speed stop enable, clear position
count, speed mode Zero fixed, multi-speed speed selection 0, multi-speed speed selection
1, multi-speed speed selection 2, multi-speed speed selection 3, position command
prohibited, position command reverse, pulse command prohibited, electronic gear ratio
switch 1, position error Clear, return to zero, trigger multi-segment position,
multi-segment position selection 0, multi-segment position selection 1, multi-segment
position selection 2, multi-segment position selection 3, multi-segment position direction
selection, zero return origin switch input, xy pulse and internal position planning
switching, control Mode switch 0, control mode switch 1, enable interrupt fixed length
input, cancel interrupt fixed length, trigger interrupt fixed length, first set of second set
gain switch, reset fault, positive limit switch in position mode, Reverse limit switch in
position mode, open and closed loop in full closed loop mode , electronic gear ratio switch
2, motor overheat input, emergency stop input, internal trigger clear, internal trigger set,
internal counter count pulse, internal counter clear, speed mode UPDOWN mode UP
signal, speed mode UPDOWN mode DOWN Signal, AI zero drift automatic correction.
Digital Output Driver enabled, speed arrival, speed reduction, speed increase, zero speed, speed over
limit, forward rotation, reverse rotation, fault output, forward speed limit in torque mode,
torque mode In the negative speed limit, in the torque mode, the positioning is completed,
the positioning is close to the output, the zero return is completed, the position error is too
large, the output is interrupted by the fixed length, the software limit output is output, the
brake output is Input command is valid, often OFF, always ON, torque limit output, torque
arrival, internal trigger status, internal counter count arrives, speed is consistent, pulse
position command is zero output


Details about a Servo Drive, how to select the Servo drive model and do installation?

 

1KW 2000rpm AC Servo Control System With 2500 Pulse Incremental 0

The panel contains 5 buttons and 5 digital tubes.

The general functions of the five buttons are shown in the table below.

 

Key Name Key function
Mode mode switch, return to the previous menu
▲(add) increase flashing bit value of the LED digital tube
▼(dec) Decrease flashing digit value of the LED digital tube
◄◄(shift) Moves the blinking LED tube to the left; checks the high value of data
longer than 5 bits; Fault reset;execute Fn function
SET read/write parameter values


Installation:

● Install the driver on a dry and sturdy platform. Maintain good ventilation and 

heat dissipation during installation and maintain good grounding.

● Please install in the specified direction to avoid malfunction.

● When installing, please ensure that the servo driver is kept at a specified

distance from the inner surface of the cabinet and other machines, otherwise it may cause fire or malfunction.

 

Installation
Environment
Requirements
Atmospheric Pressure 86~106kPa
Mbient Humidity 0~55℃
Ambient Temperature 0~90%RH
IP Rating IP20
Vibration 0~4.9m/s^2

1KW 2000rpm AC Servo Control System With 2500 Pulse Incremental 1

Accessories:

 

  Accessory name Image  
Satandard Spare Parts Power terminal 1KW 2000rpm AC Servo Control System With 2500 Pulse Incremental 2 Adapt to E1,E2 structure drive
Cn3 encoder plug Encoder plug on the driver side
Cn4 control terminal plug Input/output signal terminals,user wiring
Encoder connection line The standard cable length is 3, 5, 8, 10, 13, 15 meters, according to customer
needs Provide independent connector
Power line The standard cable length is 3, 5, 8, 10, 13, 15 meters, according to customer
needs Provide independent connector
Drive monitoring line Connect and adjust the software for remote monitoring and firmware update
Purchasing Spare Parts USB to RS232 Adapter cable If necessary, self purchase
Ethernet communication line If necessary, self purchase

 

Packing:

 

Packing details of Servo Drive
Products E1(3-6A) E2(7-12A) E3(16-27A) C015(32-38A) C022(45-60A)
Ctn. Size 280*208*78 280*208*112 375*290*155 440*296*288 510*305*325
Packing details of Motion Controller
Products VA Motion VA Expansion VE Motion VE Expansion(32) VE Expansion(76)
Ctn. Size 176*165*78 127*75*70 144*128*69 176*164*78 316*164*78

1KW 2000rpm AC Servo Control System With 2500 Pulse Incremental 3

Delivery Time and Shipping Way

 

Quantity 1-5 kits 50-100 kits 200-500 kits
Delivery time Within 3 days  5-10 days 15-25 days

 

1. For small order we always can delivery out within 1 week.

2. Our products can be shippied via Air, Land or Sea.

 

Cetificates:

1. CE (EU Safety Standard);
2. IEC/EN61800-5-1:2007 (Safety requirements for electrical, thermal and energy in Section 5-1 of the

variable speed electric driver system), corresponding to the national standard GB12668.501-2013;

3, IEC / EN61800-3: 2004 + A1 (speed control electric driver system part 3 electromagnetic compatibility

standards and its specific test methods), corresponding to the national standard GB12668.3-2012.

1KW 2000rpm AC Servo Control System With 2500 Pulse Incremental 4

 

이 제품에 대한 자세한 내용을 알고 싶습니다
나는 관심이있다 1KW 2000rpm AC Servo Control System With 2500 Pulse Incremental 유형, 크기, 수량, 재료 등과 같은 자세한 내용을 보내 주시겠습니까?
감사!
답변 기다 리 겠 습 니 다.